Jump to content

How DO you use a wax seal?


Garageboy

Recommended Posts

  • Replies 27
  • Created
  • Last Reply

Top Posters In This Topic

  • lovemy51

    4

  • Titivillus

    3

  • Shangas

    2

  • BirdValiant

    2

With all this talk, I ran a search, and nothing. So how do I use the seal/wax? Thanks

 

A quick and dirty explaination.

  • First off find two things that you want to stick together, an envelope, some wrapping paper ribbons etc. :ltcapd:
  • Then using a lighter or candle flame or blowtorch soften a piece of sealing wax until it starts to flow. I try to pull the ends of my wax to a point after use so I can quickly get a piece to melt the next time.
  • at this point I use two methods one is with the wax and flame adjust the distance so that a dime to quarter size pool of wax is formed
  • or if it's soft press the end and five it a twist- this usually makes an ugle pool but heat can clean that up.
  • Give the wax a time to rest- this is totally subjective :thumbup:
  • Either breath on the matrix of the seal ( the metal part) or dip it in oil or water or on an icecube or use a stamp pad so you've got a releasing agent.
  • Then with a quick motion press EVENLY downward on the wax pool with the seal until there is a nice 'rasied' ring around the matrix.
  • give the seal a time to relax- this is totally subjective :bunny01: Although if you can slightly rock the seal it's a good one!
  • lift the seal and be amazed with your handywork :thumbup:

Note that the amount of wax pool is for a typical seal- I've got one that is nearly 1-1/2" on a side so the amount of wax is much greater for it. Playing around with the wax and seal will help.

 

I have also made seals onto aluminum foil so that I did several at a time and then glued them on afterwards. I have also seen a device that looks like an electric donut maker that heats the wax and then you squeeze a trigger to release the exact amount.

 

Hope this helps.

 

Kurt

 

 

 

 

Link to comment
Share on other sites

  • 3 weeks later...

I wish somebody would make a video on YouTube about wax seals, how to use them, a collection, etc.

Pen: Waterman Phileas

Ink: Waterman Black, Waterman Blue-Black, PR Spearmint, Noodler's Walnut

 

If I had an income, I'd be spending money in $2 bills and $1 coins!

Link to comment
Share on other sites

I wish somebody would make a video on YouTube about wax seals, how to use them, a collection, etc.

try this one

 

http://youtube.com/watch?v=bYkF9ViNUwA

 

 

That's a nice technique :thumbup: but I shy away from wax with a wick as you get carbon pieces as the wick burns.

 

Kurt

 

the sales-lady in the video was saying that she actually like that, it gives it a more rustic look :rolleyes: ... personally, i don't mind that myself, but i think she's trying hard to sell the product!...

 

...anyways, it was the only video i could find about wax seals (all others were about bathroom toilets wax seals!!!!!) :blush:

Link to comment
Share on other sites

the sales-lady in the video was saying that she actually like that, it gives it a more rustic look :rolleyes: ... personally, i don't mind that myself, but i think she's trying hard to sell the product!...

 

...anyways, it was the only video i could find about wax seals (all others were about bathroom toilets wax seals!!!!!) :blush:

 

Yes I think it was more sell than anything else :bunny01:

 

 

thanks for digging up the video.

 

Kurt

Link to comment
Share on other sites

At the bottom of the page on that first answer... letterseals... shows video demonstrations....

SAVE your important PM's before Nov 26 to your computer, otherwise they are "GONE" !!!!

Link to comment
Share on other sites

At the bottom of the page on that first answer... letterseals... shows video demonstrations....

 

i got to the icon for the video, but sent me somewhere else?????!!!!!

Link to comment
Share on other sites

There are also kits using a hot glue type gun and seal stick so no muss or fuss and instructions come with it. Look in Craft stores, scrapbook stores or on the web under "wax seals" or "sealing wax". Also try J. Herbin Calligraphy supplies. They are a big maker of wax for seals and have been forever. Also HisNibs.com and Pendemonium as well as a place in San Francisco >Atelier Gargoyle (spelled something like that).

Edited by hardyb

The Danitrio Fellowship

Link to comment
Share on other sites

There are also kits using a hot glue type gun and seal stick so no muss or fuss and instructions come with it. Look in Craft stores, scrapbook stores or on the web under "wax seals" or "sealing wax". Also try J. Herbin Calligraphy supplies. They are a big maker of wax for seals and have been forever. Also HisNibs.com and Pendemonium as well as a place in San Francisco >Atelier Gargoyle (spelled something like that).

is this the place...

 

Atelier Gargoyle

1890 Bryant St Ste 308c

San Francisco, CA 94110 Map

ph# 415 864-2928

 

... i live in san francisco, i think i'll check it out!

 

Link to comment
Share on other sites

is this the place...

Yes, that's the place. Call before you go and take a full wallet - Ward and Linnea are wonderful hosts and you'll come out of there with more than you went in to buy. :rolleyes:

<span style='font-size: 12px;'><span style='font-family: Trebuchet MS'><span style='color: #0000ff'><strong class='bbc'>Mitch</strong></span><span style='color: #0000ff'>

=======

http://exploratorius.us

Link to comment
Share on other sites

Lots of places sell sealing wax and seals. Some places online will even make you sheets of prestamped seals that you can just peel and stick to your document. Those are expensive, though, and just not as fun or necessarily as durable as making your own.

 

The biggest thing to note, though, is the type of wax you are buying. If you plan to send it through the mails, be sure you purchase a wax that specifies it is safe to mail; otherwise, you'll end up having cracked and pealing seals. Many of the newer "waxes" aren't wax, can dry very brittle, and are mostly for decorative purposes only. Also, many postal offices won't accept the seal on the outside of an envelope because it will mess up their sorting machines. The solution here is to double envelope and ask for hand canceling.

 

As far as not liking wicks is concerned, some places offer wax beads that you melt in small pots or in small spoon-like tools specifically made for the purpose.

Scribere est agere.

To write is to act.

___________________________

Danitrio Fellowship

Link to comment
Share on other sites

Despite all the talk of the USPS not liking wax seals and charging the 17 cent surcharge, I've never had a problem mailing them at the usual first class rate.

 

YMMV.

Link to comment
Share on other sites

I wish somebody would make a video on YouTube about wax seals, how to use them, a collection, etc.

try this one

 

http://youtube.com/watch?v=bYkF9ViNUwA

 

That's actually pretty much the only thing I found on YouTube, but I don't generally believe anything anybody says on those home shopping networks. "Now featuring pre-glued instructions, so that you'll never have to look for them again!" I gave up after I saw someone on a show advertising a generic laptop with very standard features as something that "you'll never have to upgrade, ever." That was a very nice price for a starter set, though.

 

It would be nice if someone made an instructional video on YouTube for wax seals, maybe also featuring a collection. Maybe that could be a different video. Or a whole series of videos. Video reviews of pens? There's one already available here:

. It wouldn't work as well for ink reviews, though.

Pen: Waterman Phileas

Ink: Waterman Black, Waterman Blue-Black, PR Spearmint, Noodler's Walnut

 

If I had an income, I'd be spending money in $2 bills and $1 coins!

Link to comment
Share on other sites

I've used wax seals successfully on the outside of the envelope. More recently, I've been using it as flourish under my signature. I completely non-functional use, but how functional are wax seals anyway? I nearly never get a "perfect" imprint because I use the ring that's on my finger, which makes aiming hard, but I think that's part of the charm.

 

I sneakily melted some wax and stamped (or punched, rather) a seal in the corner of a super-crowded barnes & noble (Union Square in NY), and the woman sharing my table (it was that crowded) looked up, blinked, and said "you do it old style, no?". "Yep." She had also just watched silently as I had my two new bottles of ink and four cups of water and was flushing out a pen to replace the ink.

Link to comment
Share on other sites

I've used wax seals successfully on the outside of the envelope. More recently, I've been using it as flourish under my signature. I completely non-functional use, but how functional are wax seals anyway?

 

I think they're still functional as tamper-proofing, at least to a limited extent. You can probably (or at least possibly) steam open an envelope sealed with the standard glue, and then re-seal it more or less convincingly, but I think it would be a lot harder to open and re-seal a wax seal without leaving noticeable damage somewhere. Especially with the more flexible mailable faux-waxes; they seem to stick pretty fiercely.

 

Do you really *need* extra tamper-proofing on your letters? Well, probably not. But still.. :)

A handwritten blog (mostly)

 

http://img525.imageshack.us/img525/606/letterji9.png

Link to comment
Share on other sites

  • 5 years later...

Hey Guys,

 

I didn't want to create a new thread, and this one seemed to have the most appropriate title in regards to my questions...

 

I don't often use my sealing-waxes. But I recently had occasion to do so. And I have an issue which hopefully someone can give me an answer to.

 

My usual method:

 

1. Write/type correspondence.

2. Fold tightly.

3. Weigh down the paper.

4. Melt the wax over the paper where the two halves meet.

5. Seal.

 

My issue is between 4 and 5.

 

This doesn't happen all the time, but it has happened enough times to irritate me...

 

My wax catches fire.

 

Why? What am I doing wrong?

 

I light the wax-wick, or hold a flame up to a wax-stick, and let the wax drip onto the paper. Sometimes, I get flaming globs of wax landing on the paper which I have to blow out, without blowing out the flame that's melting the wax. And of course, I risk burning the paper.

 

Is there any way to stop this from happening? Or is it just part-and-parcel of using sealing-wax? I use a cigarette lighter to melt my wax; is that part of the problem? A match obviously doesn't last so long, a candle is messy, and I don't have any of those fancy flaming torches (not much demand for creme brulee around here, delicious though it is).

http://www.throughouthistory.com/ - My Blog on History & Antiques

 

Link to comment
Share on other sites

Hey Guys,

 

I didn't want to create a new thread, and this one seemed to have the most appropriate title in regards to my questions...

 

I don't often use my sealing-waxes. But I recently had occasion to do so. And I have an issue which hopefully someone can give me an answer to.

 

My usual method:

 

1. Write/type correspondence.

2. Fold tightly.

3. Weigh down the paper.

4. Melt the wax over the paper where the two halves meet.

5. Seal.

 

My issue is between 4 and 5.

 

This doesn't happen all the time, but it has happened enough times to irritate me...

 

My wax catches fire.

 

Why? What am I doing wrong?

 

I light the wax-wick, or hold a flame up to a wax-stick, and let the wax drip onto the paper. Sometimes, I get flaming globs of wax landing on the paper which I have to blow out, without blowing out the flame that's melting the wax. And of course, I risk burning the paper.

 

Is there any way to stop this from happening? Or is it just part-and-parcel of using sealing-wax? I use a cigarette lighter to melt my wax; is that part of the problem? A match obviously doesn't last so long, a candle is messy, and I don't have any of those fancy flaming torches (not much demand for creme brulee around here, delicious though it is).

 

Are you getting soot in your wax? If you are, try holding the flame further away from the wax as you're melting it. I find it best to constantly rotate the wax stick as I'm melting it to get an even blob of wax, without the lighter flame touching the wax stick.

Occasionally the wax would smoke a little but it shouldn't catch fire. I use a cigarette lighter as well.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now







×
×
  • Create New...