Jump to content

Mercian

Recommended Posts

A Warning to be careful with Lacquered pens

 

I own a few pens that have lacquered finishes. The first lacquered pen that I bought is a Parker Urban, in the ‘Navy Blue’ finish with chrome trim.

I bought it in 2013, and I always used to post the cap on the end of the pen whenever I wrote with it.

Being slightly-obsessive about having things arranged ‘just-so’, I always posted the cap so that its clip was aligned with the centre of the pen’s nib. This habit is actually useful if one’s pen has a hooded nib, like a Parker “51”. Aligning the clip of the posted cap with the nib of a “51” means that one always has an obvious visual indication of the position of that pen’s nib.

 

Anyway, back in 2021 I was about to post the cap of my Navy Blue Urban when I noticed this:

 

large.125239CF-89C9-42C6-9036-50C02BDD66C9.jpeg.5761ec37f6304a1ff8a142cf444c3de7.jpeg

 

It is a small scuff in the lacquer, through which one can now see the brass of the pen’s body.

OK, it is only small, and is hardly ‘the end of the world’.

But it made me realise that lacquer (on this pen at least) is not as durable as I had assumed that it would be.


Now, it may be that this lacquer on this pen is, for whatever reason, less durable than the lacquer on other pens.

Or it may well be the case that I am especially ham-fisted, or clumsy in the way in which I post the cap on this pen, but…

 

If you are, as I am, a person who would find a small scuff mark like this one to be disappointing, I advise you to take care when posting the cap on any lacquered pens that you own.

I no longer post the caps on the few I own that have lacquered finishes.

 

Slàinte,
M.

large.Mercia45x27IMG_2024-09-18-104147.PNG.4f96e7299640f06f63e43a2096e76b6e.PNG  I 🖋 Iron-gall  spacer.png

Link to comment
Share on other sites

  • Replies 8
  • Created
  • Last Reply

Top Posters In This Topic

  • Mercian

    2

  • MidSouthern-Dad

    2

  • amberleadavis

    1

  • TgeekB

    1

I don’t post at all.  All materials of the pen body are soft and will be scuffed by the pen cap eventually.   Look at the characteristic round scratches on the bodies of Pelikan pens due to the cap lip scratching as you screw on the cap.

 

Lacquer is a form of paint.  Imagine if you keep striking your car door with the key in the same spot every day!

Link to comment
Share on other sites

I agree with @MidSouthern-Dad. I don’t get religious about how people use their own pens, but mine are never posted.

“ I know you think you understand what you thought I said but I'm not sure you realize that what you heard is not what I meant”  Alan Greenspan

Link to comment
Share on other sites

It’s a lesson that I’ve only learned the hard way! :doh:

 

I’m really careful when I post the cap on my Ciselé Parker 75 - but that’s out of concern for the clutch mechanism inside the cap, rather than the finish on the pen’s metal body.

 

I continue to post my “51”s, and my Pelikan M205 too (because that pen is too small in my hand to be comfortable when not posted).
But I now take much greater care when doing it, and have even put a small amount of candle wax on to the black plastic body of my M205 to try to prevent the scratching that you so-rightly warn against 👍

large.Mercia45x27IMG_2024-09-18-104147.PNG.4f96e7299640f06f63e43a2096e76b6e.PNG  I 🖋 Iron-gall  spacer.png

Link to comment
Share on other sites

As far as damage is concerned, I think it makes a difference what cap material is up against the surface of the pen barrel, as much or more than what material the barrel is made of. If the inside edge of the cap is metal, as in the photo in the OP, probably not posting is a good idea. When it's resin against resin, or urushi against urushi, the risk of damage is less. Note: my modern Pelikans all have resin on the inside edge, the metal cap ring is on the outside of the cap and never touches the barrel. 

 

I have some vintage pens that are fairly small, and writing without posting is uncomfortable. None of these has metal edges on the inside of the cap; I would in general avoid such a configuration anyway. 

Link to comment
Share on other sites

The cap of the Pelikan M series is a resin, and the body is celluloid.  However, they caps are still able to scratch the barrel of the pen when you screw them on and off.

I have a few ebonite pen bodies, with ebonite caps, and there are the same swirlies from screwing on / off the cap.

My sad story of capping damage is a Montblanc Ramses II, which has a vermeil (gold plate over sterling silver) body, and a cap carved out of lapis lazuli stone, lined with plastic.  One attempt at capping it, and it left a permanent mark on the soft gold.  Never again would I ever post a cap (except on the tiny pens that need it, like the Kaweco sport, or Pilot E 95S).

Link to comment
Share on other sites

Nakaya warns against posting their pens.  I've read this elsewhere as well, but don't recall where

Add lightness and simplicate.

 

Link to comment
Share on other sites

I’m also someone who never caps for this very reason. It never made sense to me. 

Current lineup:

Pilot Custom 743

Montblanc 146 LeGrande

Lamy 2000

Platinum 3776 Jade

Link to comment
Share on other sites

Thank you for shairng.

Fountain pens are my preferred COLOR DELIVERY SYSTEM (in part because crayons melt in Las Vegas).

Create a Ghostly Avatar and I'll send you a letter. Check out some Ink comparisons: The Great PPS Comparison 

Don't know where to start?  Look at the Inky Topics O'day.  Then, see inks sorted by color: Blue Purple Brown Red Green Dark Green Orange Black Pinks Yellows Blue-Blacks Grey/Gray UVInks Turquoise/Teal MURKY

 

 

 

 

 

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now







×
×
  • Create New...