Montblanc 32 Repair?

[The Blue Knight]

I got a Mont blanc 32 in a job lot the piston rod seems to have snapped. I was wondering if there would be a way to repair or someone I could send to be repaired to. Or weather it should be put into the parts bin as it's a relatively inexpensive model (i.e. it isn't worth the repair expenses)?

[CS388]

Despite being a bit fiddly, it's a relatively easy repair*, if you can get a replacement piston rod.

 

Yes, a pretty basic model, but very good and reliable writers, far too good for the parts bin, imho.

 

Good luck.

 

 

*There are many posts on this forum which will walk you through this repair.

[The Blue Knight]

Despite being a bit fiddly, it's a relatively easy repair*, if you can get a replacement piston rod.

 

Yes, a pretty basic model, but very good and reliable writers, far too good for the parts bin, imho.

 

Good luck.

 

 

*There are many posts on this forum which will walk you through this repair.

 

Would a MB 22 be a suitable donor pen?

[Karmachanic]

"There are many posts on this forum which will walk you through this repair."

Don't be afraid to search the repair section of the forum. You will learn many things

Edited February 13, 2020 by Karmachanic

[CS388]

 

Would a MB 22 be a suitable donor pen?

 

I think it might, if you only want the rod?

 

I don't have any of these pens, anymore, so can't confirm. If you already have one, try it and see.

But, if you're thinking of buying one for parts - wait until someone else can confirm that it will fit your pen.

 

Good luck

[fountainbel]

 

Would a MB 22 be a suitable donor pen?

 

Yes, the thread spindles are identical.

Best,

Francis

[The Blue Knight]

 

Yes, the thread spindles are identical.

Best,

Francis

 

Thanks I got one with cracked cap cheap so it will be a project for another day.