Nemosine Singularity

[Tessy Moon]

Thank you BBU!

Those pictures were exactly what I was hoping for! Extremely helpful!

 

I think I am going to go with .6mm for a thinner line to use when I don't want to have the thicker 1.1

[Ashamam]

https://www.fountainpennetwork.com/forum/index.php/topic/239068-a-review-of-the-nemosine-singularity-demonstrator-fountain-pen/?do=findComment&comment=2614482

 

That's the only comparison I know of that was done by the same person using the same ink on the same paper, but it's hard to judge based on that picture. It looks like the 0.8 mm was a lot drier at the time of testing, and that ink is known for shading so it probably wasn't suited for a nib comparison. Either that or he accidentally swapped the nibs. Other comparisons show that the 0.8 mm produces a noticeably thicker line, but you'll have to make estimates based on tests done by multiple people and visualize an average.

 

Here's a comparison pic that includes the 0.6 mm and some other common stubs. Maybe you can use the Goulet's samples to cross-check how everything compares to the nib you currently have. Credit: K-Cakes:

 

http://www.flickr.com/photos/counter_culture/8103735009/

 

Also bear in mind that the Fission weighs about 45 grams.

 

While I'm here, I have a question about these pens. I have the 0.6 mm as my first fountain pen. About 60-70% of the time, it's writes acceptably. But sometimes it'll get extremely dry and skip often (or not write at all unless I play around with it for a bit) or suddenly go super-wet and make thick lines that I don't like. I haven't been able to write an entire page with a completely consistent look. Is this a characteristic of the pen or ink? So far, I've just been using the included cartridges. Is this an issue that I can expect to rectify by using bottled ink? Or is it a nib/feed problem that I can't do anything about?

I had a similar problem with my Demonstrator Nemosine pen when I was using the CC and Noodlers Black. I've since converted it to an Eyedropper and have had no issues with the pen. I'm not sure if it was fixed by me disassembling and scrubbing the feed with mild dish detergant (Which I also did when changing ink colors), or if it has to do with the Converter not having an agitator, which could cause some inks to stick to the sides and trap air bubbles thereby affecting the feed flow (Similar to why Pilot put an agitator in all there new CON-50's). Before condemning the converter however I would recommend taking out the nib/feed and washin/scrubbing the feed with mild detergant and see if that helps at all. My two other Nemosine Singularity's have not had this problem.

[BBU]

Thanks for the tips! Actually, a Noodler's black (either the standard or one of the other permanent variations) is exactly what I'll be using. I didn't buy the demonstrator because some people who had it complained of leaks in the cap, so I thought it would be safer to buy a solid colour just in case there were materials or manufacturing differences. This was before realizing how little ink a converter holds...

 

I definitely intend on flushing the pen, but I was going to do it the common way by taking off the barrel while leaving everything else intact, and using the converter to pull a water and dish soap solution into the nib/feed/converter. I figured I'd wait until I'm done practicing with the cartridges before doing this. I'm apprehensive about taking the nib/feed out of the grip section out of fear that I may not be able to put it back in perfectly. If by agitator you mean a ball inside of the converter, the converter that came with my Nemosine does have a clear ball in there.

 

When I get a chance to flush the pen and scrap the cartridges in favour of Noodler's, I'll report on the results. Based on your experiences, would you say that one of the alternative permanent blacks would work better than the standard black in this pen?

 

Thanks.

[TSherbs]

Thanks for the tips! Actually, a Noodler's black (either the standard or one of the other permanent variations) is exactly what I'll be using. I didn't buy the demonstrator because some people who had it complained of leaks in the cap, so I thought it would be safer to buy a solid colour just in case there were materials or manufacturing differences. This was before realizing how little ink a converter holds...

 

I definitely intend on flushing the pen, but I was going to do it the common way by taking off the barrel while leaving everything else intact, and using the converter to pull a water and dish soap solution into the nib/feed/converter. I figured I'd wait until I'm done practicing with the cartridges before doing this. I'm apprehensive about taking the nib/feed out of the grip section out of fear that I may not be able to put it back in perfectly. If by agitator you mean a ball inside of the converter, the converter that came with my Nemosine does have a clear ball in there.

 

When I get a chance to flush the pen and scrap the cartridges in favour of Noodler's, I'll report on the results. Based on your experiences, would you say that one of the alternative permanent blacks would work better than the standard black in this pen?

 

Thanks.

1) it's impossible to put the nib/feed back in wrong in these pens. The opening in the grip section is notched and the nib and feed only fit in one way--perfect every time.

 

2) I have used both kinds of blacks in these pens. They all work fine, but my x-feather (Noodler's) does run a bit dry in it. Aurora and Perle Noire gush from it (as they do from other pens).

[Osmaroid]

If you don't want to remove the nib and feed, a really good flush can still be obtained, but not by using the built-in converter. It is much better to remove the converter and flush that, a quick job, and then give the nib assembly a really good flush using a rubber bulb. I use one that came with an ear flushing kit from the local pharmacy - not an expensive purchase at all. I removed the plastic nozzle and the resulting hole fits tightly over most sections. I also have one that is all rubber that just needs some of the nozzle trimming off to get the required opening size. I fill the bulb with either a weak detergent solution or plain water, fit it over the section at the opposite end to the nib, and force the large volume of water through the nib/feed/section assembly. It sometimes takes two full bulbs of water to flush out existing ink thoroughly, and always does a better job than just using the converter (the latter at a bare minimum leaves the ink that got between the converter and the section walls).

This is one of my indispensable tools when working on pens new or vintage. One last advantage, the large flow of fluid allows you to see where it is coming from and, for example, if it doesn't exit the hole in the nib in a separate stream, then the feed is probably clogged and at this point dis-assembly of nib and feed is the only way to go.

[Athoskat]

I have a number of Nemosine Singularities with different nib sizes. They are super nice writers. I have also mated a Noodlers #6 Flex nib to the Nemosine Singularity (perfect fit)with excellent results, a Flex pen for drawing and writing.

Edited September 10, 2014 by Athoskat

[drawline]

It is really cool that a company selling at this price point provides a factory made stub on the smaller side and not just the typical 1-3.0s. I also read they may be a tad bit oblique? Which is also interesting.

[Sailor Kenshin]

I don't notice any oblique....

[ailevin]

I have a number of Nemosine Singularities with different nib sizes. They are super nice writers. I have also mated a Noodlers #6 Flex nib to the Nemosine Singularity (perfect fit)with excellent results, a Flex pen for drawing and writing.

 

Just to turn the tables, I recently put a .6mm Nemosine nib in a Noodler's Konrad and I am very pleased with the result--the line is wet but controlled. I think this combo will find its way into my regular rotation.

 

The Konrad has always felt good in my hand, and of course the Noodler's feed has no trouble keeping up with most any nib. I inked a Konrad with Goulet 1.1mm stub, but the line was too wide for my smallish scrawl. Also, since I am used to a Japanese F or European XF for my daily writer, the 1.1mm nib seemed to be shouting. The .6mm is a nice compromise size that gives the impression of a medium nib, but with a bit more character because of line variation with direction of stroke.

[Scribblesoften]

Thanks for the tip. I just ordered three of the .6mm nibs for a couple of different pens.

[PrtclMn001]

I have one of these pens and it is fantastic. I use it every day.

 

Someone pointed out that it is very similar to the old Sheaffer No Nonsense and I have to agree... I've been using the same 5 Sheaffer No Nonsense pens for 20+ years; I have many more expensive pens but I always end up with the pens with which I learned to write. I wanted to find something similar to carry with me as the Sheaffer pens get more precious to me the longer I have them and I fear one of them getting damaged, lost, or stolen. The Singularity fits the bill nicely.

 

The attached shows the Singularity demonstrator using one of the supplied cartridges and a 0.8 nib. I have a medium nib on the way as well. The pen has since been flushed and refilled with J. Harbin Encre Verte (I am "seasonal" with my ink and am using an ink that smells of apples during the fall ). Please forgive the poor paper from work...

 

"Memory" in morse on the box was pretty neat considering one of my other hobbies is Amateur Radio and I regularly use Morse Code.

 

Oh, and "Hi" by the way...

Edited October 5, 2014 by PrtclMn001

[TSherbs]

hi, and I have the exact same pen and nib combo, but it has been out of rotation for a while. Your pic and testimonial are prompting me to ink 'er back up!

[Sailor Kenshin]

I have one of these pens and it is fantastic. I use it every day.

Someone pointed out that it is very similar to the old Sheaffer No Nonsense and I have to agree... I've been using the same 5 Sheaffer No Nonsense pens for 20+ years; I have many more expensive pens but I always end up with the pens with which I learned to write. I wanted to find something similar to carry with me as the Sheaffer pens get more precious to me the longer I have them and I fear one of them getting damaged, lost, or stolen. The Singularity fits the bill nicely.

The attached shows the Singularity demonstrator using one of the supplied cartridges and a 0.8 nib. I have a medium nib on the way as well. The pen has since been flushed and refilled with J. Harbin Encre Verte (I am "seasonal" with my ink and am using an ink that smells of apples during the fall ). Please forgive the poor paper from work...

"Memory" in morse on the box was pretty neat considering one of my other hobbies is Amateur Radio and I regularly use Morse Code.

Oh, and "Hi" by the way...

Niiice handwriting! Welcome aboard.

 

Your Nemo is equipped with the only nib I don't yet have in the model. Maybe I'll go back and see if there's a color I also don't have.

[Tessy Moon]

I have also come to love my demonstrator singularity; I currently have the .6 nib installed. Eventually I will buy another color with the .8 nib. It's a great little writer to carry around with you.

[cjpandya]

Nice review!

[cjpandya]

I have one of these pens and it is fantastic. I use it every day.

 

Someone pointed out that it is very similar to the old Sheaffer No Nonsense and I have to agree... I've been using the same 5 Sheaffer No Nonsense pens for 20+ years; I have many more expensive pens but I always end up with the pens with which I learned to write. I wanted to find something similar to carry with me as the Sheaffer pens get more precious to me the longer I have them and I fear one of them getting damaged, lost, or stolen. The Singularity fits the bill nicely.

 

The attached shows the Singularity demonstrator using one of the supplied cartridges and a 0.8 nib. I have a medium nib on the way as well. The pen has since been flushed and refilled with J. Harbin Encre Verte (I am "seasonal" with my ink and am using an ink that smells of apples during the fall ). Please forgive the poor paper from work...

 

"Memory" in morse on the box was pretty neat considering one of my other hobbies is Amateur Radio and I regularly use Morse Code.

 

Oh, and "Hi" by the way...

I love this demonstrator!

[PrtclMn001]

I love this demonstrator!

[TSherbs]

I have also come to love my demonstrator singularity; I currently have the .6 nib installed. Eventually I will buy another color with the .8 nib. It's a great little writer to carry around with you.

great, yes! "Little"....not really...

[Tessy Moon]

Your right it isn't little. I used "little" as an affectionate term, but it is not little in size!

It is easy to carry around in my purse though and I haven't had any problems with it as an "out and about" pen.

[cjseibold]

I might get this demonstrator for work. After having two pens mysteriously walk away from my desk, I can now only justify buying cheaper pens for the office. This just might be the ticket.