Search the Community

This is my review of a new, currently produced Onoto Magna Classic Rosso fountain pen, with a broad 18K nib. First, some photos of what I'm talking about. (1) Onoto gives you a choice of box for your new pen, either a "high gloss lacquered presentation box" or a "leather pen roll with a leatherette box." I chose the former, which is pictured here: The lacquered box is quite attractive and solid and comes in the cardboard box. When one unwraps everything and opens the wood box, here is what you get (I don't show the polishing cloth, but one comes inside a glossy cardboard holder): The blue "Onoto" ribbon actually is on the outside of the black cardboard box's paper wrapping, so the effect is that of a fancy gift. Next, here are photos of the pen itself: I ordered this pen with only two extra-cost options; I got the 18K nib (in broad width), which cost $209.16, and the "extra weight" option (shown in the photo looking into the barrel; the brass insert), which cost $20.92. Other options available are: (a) nib modification to stub, italic, or other ($87) ; (b) customized engraving ($40.67) ; (c) an additional rollerball conversion kit ($87.15) ; or (d) a plunger-fill converter ($290.50), which you can't get with the extra weight option (that special converter won't fit). The base price of the pen with a bi-color steel nib in either F, M, or B is $463.63. These costs reflect the exchange rate between Pound and Dollar at the time of the order in January. According to the Onoto website page for this pen, the following are the important measurements: Length capped: 127mm = 5.0" Length posted, including nib: 166mm = 6.535" Length of cap: 67mm = 2.638" Barrel Diameter range: 11 - 13.2mm = 0.433" - 0.52" Cap Diameter range: 14 - 15.8mm = 0.55" - 0.622" Weight: 25g (standard) or 32g (with extra weight option) Cap Weight alone: 13g The cost of shipping from the U.K. to Baltimore was approximately $25 (19.99 pounds), using today's exchange rate. So, this is an expensive pen, and many of you justifiably will want to compare it's value with that of it closest competitors. I'll leave that exercise to you all. In the meantime, here are my relatively early impressions of this pen: The 18K broad nib is two-toned. It writes with a medium-to-broad stroke and is on the firmer side, but is by no means a "nail." In fact, it writes with a silky smoothness, gliding across nice paper in a satisfying way. Depending on how you write, but considering how I write, there was some subtle shading in the various strokes of the pen. I provide a writing sample a bit lower here. The cap takes about 4-5 turns to remove and relocate on the barrel. For some, that is too many turns, and I'm inclined to agree, but for me this issue is minor. The cap can be posted quite easily and sits securely on the end of the barrel. I don't generally post my caps, and on this pen I see no reason to with this pen. As this pen has the extra weight option in which a brass (or other metal) cylinder is inserted into the barrel, this pen could not be purchased with the plunger-filler converter option. I purchased the pen with the standard twist converter, as shown. I filled the pen in the typical manner, and it wrote immediately and smoothly. I have been writing with it every day for 3 weeks, and I have not had any hard starts or skips. The pen writes beautifully. The resin body and cap feel warm and solid. The color is a bright red and is quite beautiful to my eyes. The ink being used in this pen is Private Reserve Black Cherry. Here is a writing sample: I am happy that I purchased this pen. I welcome any comments or questions you may have about it.