Jump to content

Mohi Tanishq-New Indian Acrylic Beauty

WDP4BAAZ

By WDP4BAAZ
in Fountain Pen Reviews

 Share

Recommended Posts

WDP4BAAZ Rare

WDP4BAAZ

Posted
Posted

Hello friends ,

 

BAAZ is back with a new FPN .....

 

Yesterday one new acrylic beauty received .. Mohi Tanishq eyedropper fountain pen

 

Thanks to my buddy residing at Aurangabad , India

 

After receiving pictures of this pen from Mr Pathak from Abhay pens , I couldn't resist myself from ordering one

 

This time also enjoying quality of a CNC turned fountain pen

 

Details :

 

This pen is a pocket size pen , smaller than Mohi Harmony pen

 

Cap : Classic looking flat top cap with steel ornaments like cap ring and clip . Square shaped clip with sufficient spring tension ok for a daily use pen . Cap posts well . Screw on cap unscrews in 2 turns

 

Section : 11 mm dia with hump to prevent slipping . Perfect design for a medium size fellow like me. Comfortable for long writing sessions Fine threads 10 mm length and tight fit with barrel to avoid ink burping .

 

Barrel : Smoothly turned and finished , having a large ink window for easy viewing of ink level . "Mohi tanishq:" letters are painted on barrel . Overall solidly built

 

Nib and feed : Ebonite feed having different design than regular Indian feeds supporting for a good wet ink flow.

Nid is engraved "Iridum point Germany" , writes between fine and medium. At first stage I fount it scratchy then I have performed some tuning tricks like grinding on fine oilstone , then it started writing well

Writing example attached with some devnagari script .

 

 

Price : "0" INR for me , as everytime it is not necessary to give money to close friends .....But as per feedback from him approximately up to 500/- INR

 

Conclusion : A truly well crafted pen. I have loaded it with my favourite Pelikan 4001 Royal Blue with 1/3 rd ink level intentionally , but found no ink burping/skipping . Rigid yet attractive design . Thanks to Mr Pathak ..

 

I hope you all will enjoy this review , comments are always welcome as usual ..

 

Sincerely ,

 

BAAZ

 

 

 

 

 

 

 

 

 

 

 

post-104009-0-66682200-1427043709_thumb.jpg

post-104009-0-34912500-1427043831_thumb.jpg

post-104009-0-95099900-1427043943_thumb.jpg

post-104009-0-06091900-1427044090_thumb.jpg

post-104009-0-35725000-1427044236_thumb.jpg

post-104009-0-65861300-1427044360_thumb.jpg

post-104009-0-66593400-1427044757_thumb.jpg

post-104009-0-64174700-1427044833_thumb.jpg

post-104009-0-44780100-1427045399_thumb.jpg

Link to comment
Share on other sites
  • Replies 14
  • Created
  • Last Reply

Top Posters In This Topic

  • WDP4BAAZ

    7

  • hari317

    3

  • mehandiratta

    2

  • Intellidepth

    1

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

WDP4BAAZ Rare

WDP4BAAZ

Posted
  • Author
Posted

Any FPN member knowing more about this feed as shown in pictures , please let me know

Link to comment
Share on other sites
Intellidepth Extremely Rare

Intellidepth

Posted
Posted

Any FPN member knowing more about this feed as shown in pictures , please let me know

 

Yes, I was wondering about it too. Nice pen design.

Noodler's Konrad Acrylics (normal+Da Luz custom flex) ~ Lamy AL-Stars/Vista F/M/1.1 ~ Handmade Barry Roberts Dayacom M ~ Waterman 32 1/2, F semi-flex nib ~ Conklin crescent, EF super-flex ~ Aikin Lambert dip pen EEF super-flex ~ Aikin Lambert dip pen semi-flex M ~ Jinhao X450s ~ Pilot Custom Heritage 912 Posting Nib ~ Sailor 1911 Profit 21k Rhodium F. Favourite inks: Iroshizuku blends, Noodler's CMYK blends.

Link to comment
Share on other sites
mhguda Antique

mhguda

Posted
Posted

Nice looking pen... where can one buy one? Preferably online...

a fountain pen is physics in action... Proud member of the SuperPinks

fpn_1425200643__fpn_1425160066__super_pi

Link to comment
Share on other sites
bk123 Rare

bk123

Posted
Posted

Any FPN member knowing more about this feed as shown in pictures , please let me know

 

Congratulations on your new acquire.

 

I have this feed in my most of customs pens made by Guider and Ratnam pens. If I'm not wrong this is number 5 feed and it helps to prevent ED burping issue very well. I guess this feed is made in bulk by some manufacturer in Kanpur.

"It's simple to be happy but difficult to be simple"

Link to comment
Share on other sites
mehandiratta Donor Pen

mehandiratta

Posted
Posted

Hello friends ,

 

BAAZ is back with a new FPN .....

 

Yesterday one new acrylic beauty received .. Mohi Tanishq eyedropper fountain pen

 

Thanks to my buddy residing at Aurangabad , India

 

After receiving pictures of this pen from Mr Pathak from Abhay pens , I couldn't resist myself from ordering one

 

This time also enjoying quality of a CNC turned fountain pen

 

Details :

 

This pen is a pocket size pen , smaller than Mohi Harmony pen

 

Cap : Classic looking flat top cap with steel ornaments like cap ring and clip . Square shaped clip with sufficient spring tension ok for a daily use pen . Cap posts well . Screw on cap unscrews in 2 turns

 

Section : 11 mm dia with hump to prevent slipping . Perfect design for a medium size fellow like me. Comfortable for long writing sessions Fine threads 10 mm length and tight fit with barrel to avoid ink burping .

 

Barrel : Smoothly turned and finished , having a large ink window for easy viewing of ink level . "Mohi tanishq:" letters are painted on barrel . Overall solidly built

 

Nib and feed : Ebonite feed having different design than regular Indian feeds supporting for a good wet ink flow.

Nid is engraved "Iridum point Germany" , writes between fine and medium. At first stage I fount it scratchy then I have performed some tuning tricks like grinding on fine oilstone , then it started writing well

Writing example attached with some devnagari script .

 

 

Price : "0" INR for me , as everytime it is not necessary to give money to close friends .....But as per feedback from him approximately up to 500/- INR

 

Conclusion : A truly well crafted pen. I have loaded it with my favourite Pelikan 4001 Royal Blue with 1/3 rd ink level intentionally , but found no ink burping/skipping . Rigid yet attractive design . Thanks to Mr Pathak ..

 

I hope you all will enjoy this review , comments are always welcome as usual ..

 

Sincerely ,

 

BAAZ

 

 

 

 

 

 

 

 

 

 

 

I liked the pen as such.... have to hold it though to get an exact idea.... one thing i want to ad ... that branding...which looks like its painted... kills the look of the pen.... doesn't look nice at all

vaibhav mehandiratta

architect & fountain pen connoisseur

 

blog | instagram | twitter

 

Link to comment
Share on other sites
WDP4BAAZ Rare

WDP4BAAZ

Posted
  • Author
Posted

Hi Vaubhav , u r right . Brand is just painted,not engraved.

 

Hi mhguda, unfortunately it is not available online. On counter of his shop only .

 

Hi bk123, Thanks a lot for information about feed .

 

Regards, Baaz

Link to comment
Share on other sites
hari317 Museum Piece

hari317

Posted
Posted

Hi Baaz, Nice review. As my friend bk notes, it is a standard Ebonite feeder used with Indian no 5 nibs. Personally, I have not seen this feeder on a Guider or a Ratnam/Ratnamson (On the pens that I have, they have used a feeder without the rear channel) but I have this feed on several of my smaller Deccans.

 

One query: is the screw holding the top of the clip slightly off-centre? is that a machining problem with the cap top or is the cap top's threading off centre?

 

Also have they used multi-start threads for the barrel-cap?

 

Regarding the imprint on the barrel, it is standard screen printing, which easily comes off for people who might dislike an overly deep or a loud engraving.

 

Best

Hari

In case you wish to write to me, pls use ONLY email by clicking here. I do not check PMs. Thank you.

Link to comment
Share on other sites
WDP4BAAZ Rare

WDP4BAAZ

Posted
  • Author
Posted

Thanks Hari , the hole on cap is slightly offset .Cap having single start threads. Top face of cap not machined properly . I have done some rework in house . Btw , how is other workmanship ? Regards, Baaz

Link to comment
Share on other sites
WDP4BAAZ Rare

WDP4BAAZ

Posted
  • Author
Posted

Thanks Hari , the hole on cap is slightly offset .Cap having single start threads. Top face of cap not machined properly . I have done some rework in house . Btw , how is other workmanship ? Regards, Baaz

Link to comment
Share on other sites
hari317 Museum Piece

hari317

Posted
Posted

Thanks Hari , the hole on cap is slightly offset .Cap having single start threads. Top face of cap not machined properly . I have done some rework in house . Btw , how is other workmanship ? Regards, Baaz

I have not handled a Mohi in person.

 

the off center cap hole can be due to improper alignment of job on the CNC?

In case you wish to write to me, pls use ONLY email by clicking here. I do not check PMs. Thank you.

Link to comment
Share on other sites
WDP4BAAZ Rare

WDP4BAAZ

Posted
  • Author
Posted

It seems that cap hole is not drilled in same setup on CNC . Hole is drilled and tapped on a drill press.

Link to comment
Share on other sites
hari317 Museum Piece

hari317

Posted
Posted

It seems that cap hole is not drilled in same setup on CNC . Hole is drilled and tapped on a drill press.

ok. thanks!

In case you wish to write to me, pls use ONLY email by clicking here. I do not check PMs. Thank you.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing






×
×
  • Create New...