... Lamy Safari ...

[TMLee]

I can't find an all black LAMY Safari.

 

The glossy black version has a shiny silver clip.

I wish it was black like it's other models.

 

Question :

How can I replace the cap clip - DIY myself ?

 

I can turn the cap top , ie, the big cross .

But I notice the inside rotates along with it.

 

How is the clip anchored?

 

Appreciate any pointers.

[Ytland]

I can't find an all black LAMY Safari.

 

The glossy black version has a shiny silver clip.

I wish it was black like it's other models.

 

Question :

How can I replace the cap clip - DIY myself ?

 

I can turn the cap top , ie, the big cross .

But I notice the inside rotates along with it.

 

How is the clip anchored?

 

Appreciate any pointers.

 

Try the charcoal Lamy Safari. Doesnt get much blacker than this...

 

[TMLee]

I can't find an all black LAMY Safari.

 

The glossy black version has a shiny silver clip.

I wish it was black like it's other models.

 

Question :

How can I replace the cap clip - DIY myself ?

 

I can turn the cap top , ie, the big cross .

But I notice the inside rotates along with it.

 

How is the clip anchored?

 

Appreciate any pointers.

 

Try the charcoal Lamy Safari. Doesnt get much blacker than this...

 

 

 

Sorry I forgot to mention,

I am familiar with the charcoal black.

But it's not black but a very deep grey.

[skipwilliams]

When the Safari first came out, the cap screw was just that, a screw which came out and allowed changing of the clip. Over time, Lamy decided to simplify production and the cap "screw" is now press-fit.

 

The FPN search function is your friend here:

 

Cap disassembly

Safari History Thread

[TMLee]

When the Safari first came out, the cap screw was just that, a screw which came out and allowed changing of the clip. Over time, Lamy decided to simplify production and the cap "screw" is now press-fit.

 

The FPN search function is your friend here:

 

Cap disassembly

Safari History Thread

 

Fantastic :clap1:

Thanks for the pointer.

I shall give it a try.

 

Amazing forum , this.

Just about any FP query will find an answer here.

:clap1:

[TMLee]

Thanks to the pointers provided above ...

 

I carried out a clip swap successfully....

 

I bought a glossy black Safari which had a silver clip.

Then I proceeded to strip the black clip out of my red safari faithful for all these years.

 

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5878.jpg

 

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5879.jpg

 

For those who are interested to DIY swap your clips, this is how.

 

You need some cylinder to push out the cap top.

I have 2 wooden dowels.

One is a disposable chopstick, and the other

my nib holder for NIKKO G nibs - those they use to draw manga comics.

The diameters were very fittingly useful.

 

Disposable chopstick

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5880.jpg

 

The head (top) of the chopstick

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5881.jpg

 

The (food) tip of the same disposable chopstick.

Its tapered and fits exactly the hole which you will see later.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5882.jpg

 

 

This is the other 'tool' i used - the nib holder.

Nicely finished and rounded so it won't mar the pen.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5885.jpg

 

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5886.jpg

 

 

Put the dowel into the cap to push out the cap top.

I find this stage difficult.

I eventually used the wooden dowel which is bigger in diameter and pushed better.

The pic here shows the chopstick used , which I didn't feel comfortable - no strength in pushing it.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5883.jpg

 

The cap top emerging as it slowly dislodges from its press-fit position

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5887.jpg

 

 

I then reverted to the chopstick to push out the cap top.

I used the tip of the chopstick which was tapered.

It fits exactly the hole.

Here you see the chopstick punching thru

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5888.jpg

 

 

 

Do the same to the other pen cap.

Here the black cap.

Chopstick removed but the rubber sleeve that clicks your pen remains there between the clip.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5897.jpg

 

 

Invert the chopstick and

push out the rubber sleeve.

The Head of the chopstick is the exact size of the rubber sleeve and the pen caps aperture thru which it emerges.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5903.jpg

 

 

The rubber sleeve will drop easily out

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5906.jpg

 

 

The disassembled parts...

The cap top,

the rubber gasket.

the rubber sleeve

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5905.jpg

 

 

 

HOW TO REMOVE THE CLIP ...

 

This has got to be done carefully.

Why?

The cut ends of the clip are not finished properly, so they are extremely sharp and WILL scratch your cap surface finish if it comes into contact.

 

Draw the wire clip closer to their entry holes.

Draw one tine closer to the hole.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5907.jpg

 

 

Since the wire is springy,

gently pull it out of the hole and over the cap top.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5908.jpg

 

Another view...

The lower line is outside of its hole.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5909.jpg

 

 

Do the same for the other tine.

Of course, don't distort the form of the clip.

 

 

 

Now the black clip is put onto the black cap

Same way ...

don't let the cut clip ends touch the cap or it will scratch your cap.

Next , insert the rubber sleeve from the bottom of the cap.

The rubber sleeve should be inserted fully till it emerges same level as the clip.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5910.jpg

 

 

Put the gasket in.

Then of course the cap top

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5911.jpg

 

 

Using the (fat) dowel again,

invert the cap with everything in place.

Keep pressure on the wooden dowel downwards,

whilst pushing the cap downwards.

This is to press-fit the cap top into the rubber sleeve, sandwiching the clip in between.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5913.jpg

 

 

Voila ... !

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5914.jpg

 

 

 

I now have an ALL BLACK Lamy Safari ....

:bunny01: :bunny01: :bunny01:

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5915.jpg

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5918.jpg

 

 

Before and after

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5877.jpg

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5916.jpg

[Juan in Andalucia]

Thanks to the pointers provided above ...

 

I carried out a clip swap successfully....

 

I bought a glossy black Safari which had a silver clip.

Then I proceeded to strip the black clip out of my red safari faithful for all these years.

 

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5878.jpg

 

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5879.jpg

 

For those who are interested to DIY swap your clips, this is how.

 

You need some cylinder to push out the cap top.

I have 2 wooden dowels.

One is a disposable chopstick, and the other

my nib holder for NIKKO G nibs - those they use to draw manga comics.

The diameters were very fittingly useful.

 

Disposable chopstick

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5880.jpg

 

The head (top) of the chopstick

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5881.jpg

 

The (food) tip of the same disposable chopstick.

Its tapered and fits exactly the hole which you will see later.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5882.jpg

 

 

This is the other 'tool' i used - the nib holder.

Nicely finished and rounded so it won't mar the pen.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5885.jpg

 

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5886.jpg

 

 

Put the dowel into the cap to push out the cap top.

I find this stage difficult.

I eventually used the wooden dowel which is bigger in diameter and pushed better.

The pic here shows the chopstick used , which I didn't feel comfortable - no strength in pushing it.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5883.jpg

 

The cap top emerging as it slowly dislodges from its press-fit position

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5887.jpg

 

 

I then reverted to the chopstick to push out the cap top.

I used the tip of the chopstick which was tapered.

It fits exactly the hole.

Here you see the chopstick punching thru

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5888.jpg

 

 

 

Do the same to the other pen cap.

Here the black cap.

Chopstick removed but the rubber sleeve that clicks your pen remains there between the clip.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5897.jpg

 

 

Invert the chopstick and

push out the rubber sleeve.

The Head of the chopstick is the exact size of the rubber sleeve and the pen caps aperture thru which it emerges.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5903.jpg

 

 

The rubber sleeve will drop easily out

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5906.jpg

 

 

The disassembled parts...

The cap top,

the rubber gasket.

the rubber sleeve

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5905.jpg

 

 

 

HOW TO REMOVE THE CLIP ...

 

This has got to be done carefully.

Why?

The cut ends of the clip are not finished properly, so they are extremely sharp and WILL scratch your cap surface finish if it comes into contact.

 

Draw the wire clip closer to their entry holes.

Draw one tine closer to the hole.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5907.jpg

 

 

Since the wire is springy,

gently pull it out of the hole and over the cap top.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5908.jpg

 

Another view...

The lower line is outside of its hole.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5909.jpg

 

 

Do the same for the other tine.

Of course, don't distort the form of the clip.

 

 

 

Now the black clip is put onto the black cap

Same way ...

don't let the cut clip ends touch the cap or it will scratch your cap.

Next , insert the rubber sleeve from the bottom of the cap.

The rubber sleeve should be inserted fully till it emerges same level as the clip.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5910.jpg

 

 

Put the gasket in.

Then of course the cap top

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5911.jpg

 

 

Using the (fat) dowel again,

invert the cap with everything in place.

Keep pressure on the wooden dowel downwards,

whilst pushing the cap downwards.

This is to press-fit the cap top into the rubber sleeve, sandwiching the clip in between.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5913.jpg

 

 

Voila ... !

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5914.jpg

 

 

 

I now have an ALL BLACK Lamy Safari ....

:bunny01: :bunny01: :bunny01:

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5915.jpg

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5918.jpg

 

 

Before and after

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5877.jpg

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5916.jpg

 

Thanks for this post; very useful. Now go all the way and put a black nib and ink in that safari. :-)

 

Juan

[bjcmatthews]

And so this is possible without damaging the hard rubber gasket at all? I've heard that it is very easily deformed, resulting in a very loose safari cap??

[neselena]

Neat! I really like this customized ver of your black safari!

[guild]

Oh man I just did this...It looks great! Now if they only made a black italic nib.

[mazinger55]

Thanks to the pointers provided above ...

 

I carried out a clip swap successfully....

 

I bought a glossy black Safari which had a silver clip.

Then I proceeded to strip the black clip out of my red safari faithful for all these years.

 

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5878.jpg

 

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5879.jpg

 

For those who are interested to DIY swap your clips, this is how.

 

You need some cylinder to push out the cap top.

I have 2 wooden dowels.

One is a disposable chopstick, and the other

my nib holder for NIKKO G nibs - those they use to draw manga comics.

The diameters were very fittingly useful.

 

Disposable chopstick

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5880.jpg

 

The head (top) of the chopstick

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5881.jpg

 

The (food) tip of the same disposable chopstick.

Its tapered and fits exactly the hole which you will see later.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5882.jpg

 

 

This is the other 'tool' i used - the nib holder.

Nicely finished and rounded so it won't mar the pen.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5885.jpg

 

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5886.jpg

 

 

Put the dowel into the cap to push out the cap top.

I find this stage difficult.

I eventually used the wooden dowel which is bigger in diameter and pushed better.

The pic here shows the chopstick used , which I didn't feel comfortable - no strength in pushing it.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5883.jpg

 

The cap top emerging as it slowly dislodges from its press-fit position

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5887.jpg

 

 

I then reverted to the chopstick to push out the cap top.

I used the tip of the chopstick which was tapered.

It fits exactly the hole.

Here you see the chopstick punching thru

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5888.jpg

 

 

 

Do the same to the other pen cap.

Here the black cap.

Chopstick removed but the rubber sleeve that clicks your pen remains there between the clip.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5897.jpg

 

 

Invert the chopstick and

push out the rubber sleeve.

The Head of the chopstick is the exact size of the rubber sleeve and the pen caps aperture thru which it emerges.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5903.jpg

 

 

The rubber sleeve will drop easily out

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5906.jpg

 

 

The disassembled parts...

The cap top,

the rubber gasket.

the rubber sleeve

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5905.jpg

 

 

 

HOW TO REMOVE THE CLIP ...

 

This has got to be done carefully.

Why?

The cut ends of the clip are not finished properly, so they are extremely sharp and WILL scratch your cap surface finish if it comes into contact.

 

Draw the wire clip closer to their entry holes.

Draw one tine closer to the hole.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5907.jpg

 

 

Since the wire is springy,

gently pull it out of the hole and over the cap top.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5908.jpg

 

Another view...

The lower line is outside of its hole.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5909.jpg

 

 

Do the same for the other tine.

Of course, don't distort the form of the clip.

 

 

 

Now the black clip is put onto the black cap

Same way ...

don't let the cut clip ends touch the cap or it will scratch your cap.

Next , insert the rubber sleeve from the bottom of the cap.

The rubber sleeve should be inserted fully till it emerges same level as the clip.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5910.jpg

 

 

Put the gasket in.

Then of course the cap top

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5911.jpg

 

 

Using the (fat) dowel again,

invert the cap with everything in place.

Keep pressure on the wooden dowel downwards,

whilst pushing the cap downwards.

This is to press-fit the cap top into the rubber sleeve, sandwiching the clip in between.

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5913.jpg

 

 

Voila ... !

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5914.jpg

 

 

 

I now have an ALL BLACK Lamy Safari ....

:bunny01: :bunny01: :bunny01:

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5915.jpg

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5918.jpg

 

 

Before and after

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5877.jpg

http://i169.photobucket.com/albums/u236/TMLee/2011/2011%20HOW-TO/LAMY%20Safari%20Cap%20Clip%20Disassembly/DSCF5916.jpg

Can you upload the pics again?

[TMLee]

Can you upload the pics again?

sorry i can't

 

the links to the pics are blocked by Photobucket unless i sign up a price plan with them at USD$399 pee year

 

i can't afford that

 

at the moment,

i am trying to find a solution out of this .

 

so i don't even know how and when this is gonna be resolved.

[pajaro]

Ah, the Photochuckit ado.